MIG/TIG/Stick 3-in-1 Welding Machine with Accessories

Designed with the TRUE COLOR technology, this solar-powered auto-darkening welding helmet (VIEWING SIZE: 3.66"x1.69") can minimize the lime green tint and protect your eyes from injury during welding. You can freely adjust the SHADE, SENSITIVITY, and DELAY CONTROL settings to suit different welding modes. Additionally, the helmet comes with a replaceable lithium BATTERY and is equipped with solar panel technology for charging while welding.

The adjustable headband of this welding helmet can be installed in just a few minutes. The installation process involves the following steps: 1. Insert the PLASTIC SCREW (Part 17) through the hole of the HEADBAND (Part 9) and place the ANGLE SET NUT (Part 16) on it, ensuring the raised edge is facing backward. 2. Put the ANGLE SET PLATE 2 (Part 15) on the ANGLE SET NUT, with the raised part facing upward. 3. Place the ANGLE SET PLATE 1 (Part 14) on the ANGLE SET PLATE 2, allowing for adjustment. 4. Attach the HEADBAND (Part 9) to the HELMET SHELL (Part 8), ensuring the square part is securely in the slot. 5. Add the CHECK NUT (Part 13) and tighten the PLASTIC NUT (Part 12), but avoid over-tightening.

For MIG welding, install the MIG control switch into the sockets, connect the MIG gun cable to the (-) terminal of the welder, and the work clamp to the (+) terminal. Do not overtighten. Set the work indicator to the MIG mode and select the corresponding wire size.

For TIG welding, connect the TIG torch to the negative (-) terminal of the welding machine. (TIG Torch and TIG Torch Adapter are not included in the package.) The work clamp is connected to the positive terminal (+). Finally, connect the gas hose to the gas regulator on the gas cylinder. This setup is typically used for welding materials such as steel and stainless steel. Set the work indicator to the TIG mode.

For MMA welding, connect the electrode cable to the (+) terminal and do not overtighten the keyway by turning it clockwise. Connect the work clamp to the (-) terminal and plug in the connector with the key cable. Set the work indicator to the MMA mode. Alternatively, for DC (-) welding, switch the connections so that the electrode cable is connected to (-) and the work clamp is connected to (+).

Our powerful 3-in-1 welding machine, comprising Flux MIG (FCAW), Lift TIG (GTAW), and Stick/MMA (SMAW), caters to various welding needs, from home DIY to outdoor maintenance and repairs. (NOTE: the lift tig torch is not included)

Equipped with precise data, this flux core welder automatically matches the most suitable voltage, current, and wire feeding speed based on your sheet thickness, making it user-friendly for both professional welders and beginners.

For added safety and intelligence, our MIG welder features overheat and overload protection, automatically shutting off when overheated. The built-in fan consistently cools down the welder for 1-2 minutes after shutdown. Additionally, the intelligent IGBT technology helps reduce energy loss and improve efficiency.

To provide you with a more convenient and cost-effective solution, our 3-in-1 welder set includes a solar-powered auto-darkening welding helmet (viewing size: 3.66"x1.69"), a pair of 932°F/500°C heat-resistant leather welding gloves, and a roll of E71T-GS .030" flux core welding wire with a 2-pound spool.

product information: